Removal and Installation 15. Disconnect five wire connectors (1—5) from single lever controller (SLC). To aid in assembly, tag wires for proper location. 1—B5 Left And Right Steer Sensor. (Marked BLUE on housing below sensor.) T10 Blue, T11 Blue, Z05 Gray Wires 2—B2 FNR Sensor. (Marked YELLOW on housing below sensor.) T01 Blue, T02 Blue, Z01 Gray Wires 3—S3 Neutral Start Switch. E09B White Wire, E03B White Wire 4—B4 Transmission Speed Control Sensor. T07 Blue, T04 Blue, Z04 Gray Wires 5—Horn Connector 18 1800 4 T130917B –UN–16MAY00 CED,TX03399,6046 –19–29MAR00–4/12 16. Remove hydraulic control tee handle. 17. Disconnect throttle linkage (1). 18. Remove reverse ratio knob (2) and nut (3).
Place switch with wires connected in battery compartment. T130903B –UN–16MAY00 1—Throttle Linkage 2—Reverse Ratio Knob 3—Reverse Ratio Switch Nut T130902B –UN–16MAY00 TM1859 (14JUL04) 18-1800-4 700H Crawler Dozer Continued on next page CED,TX03399,6046 –19–29MAR00–5/12 071404 PN=402