John Deere 700H Crawler Dozer — Check Clutch Hub Clearance

Heating and Air Conditioning Check Clutch Hub Clearance NOTE: The clutch coil is NOT polarity sensitive. 1. Check pulley-to-clutch hub clearance using a dial indicator. Mount the gauge to the pulley as illustrated and connect a set of jumper wires from the compressor to a 12V battery. 2. Rotate the pulley and check clearance in three equally spaced locations around the clutch hub. Correct clearance is 0.35—0.65 mm (0.014—0.026 in.). Add or remove shims as required. Specification Air Conditioning Clutch Hub-to-Pulley—Clearance 0.35—0.65 mm (0.014—0.026 in.) ................... 3. Tighten clutch shaft bolt to specification after correct clearance is obtained.

Specification Air Conditioning Clutch Shaft Bolt—Torque 14 (124 lb-in.) ............................................................... RW21159 –UN–24JUN92 TM1859 (14JUL04) 18-1830-29 700H Crawler Dozer TX,18,RB762 –19–23APR99–1/1 071404 PN=473 2. Remove dust cover. 7. Check pulley bearing operation. Replace pulley and bearing as required. 3. Hold the clutch hub using JDG747 Compressor Clutch Spanner (A) and remove the clutch shaft bolt 8. Install the clutch coil and new snap ring with flat (B). side of the snap ring down. Connect the clutch coil lead wire. 4. Remove the clutch hub (C). Remove the shims (H) from the clutch hub and save for installation. 9.

Install the pulley and new snap ring with the flat side of the snap ring down. Apply grease to the 5. Remove and discard snap ring (D). Remove the shims (H) and install to the clutch hub. pulley (E) using a plastic hammer or JDG220 Puller, JDG748 Jaws and JDG771 Forcing Screw. 10. Install clutch hub and shaft bolt and tighten. 6. Disconnect the clutch coil lead wire. Remove and Specification discard the snap ring (F) and remove the clutch coil Compressor Hub Retaining Nut—Torque..........................................................14 N•m (124 lb-in.) (G). NOTE: The bearing in the pulley is NOT serviceable. TX,18,RB761 –19–21JUN00–2/2 18 1830 29