John Deere 700H Crawler Dozer — Diesel Engine Coolant

Fuels and Lubricants TM1859 (14JUL04) 00-04-9 700H Crawler Dozer 071404 PN=47 Diesel Engine Coolant The engine cooling system is filled to provide protection at lower temperatures is required, consult year-round protection against corrosion and cylinder your John Deere dealer for recommendations. liner pitting, and winter freeze protection to -37°C (-34°F). Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized The following engine coolant is preferred for service: water is recommended for mixing with ethylene glycol base engine coolant concentrate. • John Deere COOL-GARD Prediluted Coolant IMPORTANT:

Do not use cooling system sealing The following engine coolant is also recommended: additives or antifreeze that contains sealing additives. • John Deere COOL-GARD Coolant Concentrate in a 40 to 60% mixture of concentrate with quality water. Coolant Drain Intervals Other low silicate ethylene glycol base coolants for Drain the factory fill engine coolant, flush the cooling heavy-duty engines may be used if they meet one of system, and refill with new coolant after the first 3 the following specifications: years or 3000 hours of operation. Subsequent drain intervals are determined by the coolant used for • ASTM D5345 (prediluted coolant) service.

At each interval, drain the coolant, flush the • ASTM D4985 (coolant concentrate) in a 40 to 60% cooling system, and refill with new coolant. mixture of concentrate with quality water When John Deere COOL-GARD is used, the drain Coolants meeting these specifications require use of interval may be extended to 5 years or 5000 hours of supplemental coolant additives, formulated for operation, provided that the coolant is tested annually heavy-duty diesel engines, for protection against AND additives are replenished, as needed, by adding corrosion and cylinder liner erosion and pitting. a supplemental coolant additive.

A 50% mixture of ethylene glycol engine coolant in If COOL-GARD is not used, the drain interval is water provides freeze protection to -37°C (-34°F). If reduced to 2 years or 2000 hours of operation. DX,COOL3 –19–05FEB99–1/1 00 04 9