John Deere 700H Crawler Dozer — Remove and Install

Hydraulic System 4. Disconnect (2 and 3). Remove solenoid and bracket (5). 5. Disconnect linkage at control valve. 6. Remove control valve (1) with hoses attached. T131074B –UN–17MAY00 7. Remove hydraulic filter hose (4). Close all openings using caps and plugs. 1—Control Valve 2—Start Aid Tube 3—Start Aid Wire Connector 4—Hydraulic Filter Hose 5—Solenoid and Bracket CED,TX03399,6067 –19–17NOV00–2/8 8. Disconnect wire lead (1) and remove filter and base (2). 21 2160 16 9. Remove primary fuel filter (water separator) (3) with hoses attached and set in frame area. 10. Remove right side step. T131075B –UN–17MAY00 11. Remove control valve levers and linkage and bellcrank if necessary.

1—Hydraulic Filter Restriction Indicator Lead 2—Hydraulic Filter and Base 3—Primary Fuel filter and Water Separator CED,TX03399,6067 –19–17NOV00–3/8 12. Attach lifting strap and hoist. T131080B –UN–23MAY00 TM1859 (14JUL04) 21-2160-16 700H Crawler Dozer Continued on next page CED,TX03399,6067 –19–17NOV00–4/8 071404 PN=524