Dealer Fabricated Tools TM1859 (14JUL04) 99-9900-7 700H Crawler Dozer 071404 PN=593 ST4920 Track Recoil Spring Disassembly and Assembly Tool NOTE: It is recommended that DFT1087 Track Recoil Spring Disassembly and Assembly Guard Tool be used with track recoil spring disassembly and assembly tool. Dimensions given are metric. Tool is the same as used on other machines except the holder (C). For each track adjuster use the holder with the correct size hole for the nut on that track adjuster. Track Recoil Spring Disassembly and Assembly Tool (compression tool) is used with hydraulic jack to compress recoil spring in track adjuster repair. Material required:
–UN–24MAR98 • 1020 HR Steel for Holder (C), Supporting Plate (E), Base Plate (F), and Base (G). • "D" Grade (SAE Grade 5) for Eyebolts (D), Nuts (A), and Cap Screws (H). T6585UY • "F" Grade (SAE Grade 8) for Studs (B). Print Numbers:
A—Nut (12 used) • A—ST4050 Nut B—Stud (4 used) C—Holder • B—ST4045 Bolt D—Eyebolt (2 used) • C—ST4035 Holder (Plate) E—Supporting Plate – ST4036 Holder (Plate) F—Base Plate – ST4037 Holder (Plate) G—Base (4 used) – DFT1204 Holder (Plate) H—Cap Screw (8 used) I—Lock Washer (8 used) • D—ST4047 Eyebolt • E—ST4040 Supporting Base • F—ST4042 Base Plate • G—ST4041 Base • H—ST4046 Cap Screw • I—ST4049 Lock Washer Continued on next page CED,TX03399,6111 –19–08JUN00–1/4 99 9900 7