John Deere 700H Crawler Dozer — Measure Wear

Measure Track Roller Wear Track System Item Measurement Specification 01 0130 Track Roller Tread Diameter 18 New OD 203.0 mm (7.99 in.) 100 Percent Worn OD 184.2 mm (7.25 in.) NOTE: Minimum used is the maximum allowable wear for rebuilding roller tread. 1. Raise unit off the ground and support it using shop stands. Under some conditions roller wear can be uneven.If wear is uneven, the single flange rollers may be interchanged with other single flange rollers to even out wear. Double flange rollers may be interchanged with other double flange rollers. 2. Release track tension by turning the check valve nut approximately one turn counterclockwise to allow grease to escape.

CED,TX03399,5941 –19–24MAR00–1/2 3. Measure roller tread diameter using a caliper such as JT07193 Special Roller Caliper from JT05518A Undercarriage Inspection Kit. NOTE: See Undercarriage Appraisal Manual SP326 for additional information. T6813AM –UN–29JAN98 CED,TX03399,5941 –19–24MAR00–2/2 TM1859 (14JUL04) 01-0130-18 700H Crawler Dozer 071404 PN=68