John Deere 700H Crawler Dozer — Remove and Install

Track System CAUTION: The approximate weight of track rollers is 59 kg (129 lb). 01 0130 5. Remove cap screws (1) to remove roller (2). 20 6. Install track roller (2) with oil fill plug toward outside of unit. T131589B –UN–12JUN00 7. Carefully lower crawler until roller cap screws can be installed. 8. Tighten cap screws (1) to specification. 1—Track Roller Cap Screw (4 used) 2—Track Roller Track Roller—Specification Track Roller-to-Track Frame Cap Screw—Torque 320 (235 lb-ft) ............................................................ 9. Apply thread lock and sealer to rock guard cap screws before installing guards. T82634 –UN–26OCT88 10. LGP machines have seven track rollers.

Single and double flange rollers are used alternately starting at the idler with a single flange roller. The LT machines have six track rollers and starting at the idler with a single, then double, single, double, double, single. CED,TX03399,5942 –19–24MAR00–3/4 11. Install rock guards. (See Remove and Install Rock Guards in this group.) 12. Adjust track sag. (See Adjust Track Sag in this group.) CED,TX03399,5942 –19–24MAR00–4/4 TM1859 (14JUL04) 01-0130-20 700H Crawler Dozer 071404 PN=70