John Deere 700H Crawler Dozer — Assemble to Turn Bushings and Lubricate Chain

Track System 10. Apply track chain lubricant to bushing ends before next set of links are installed. 01 0130 40 T96276 –UN–27OCT88 CED,TX03399,5953 –19–24MAR00–5/14 IMPORTANT: Pins must be installed so cross-drilled hole is toward link wear surface or they may break when chain is used. To make assembly easier, install all pins so holes in end are toward same side of chain. 11. Install pin in bushing so cross-drilled hole (B) is toward link wear surface. Install all pins so hole (A) in end is toward same side of chain, either left or right. T96277 –UN–27OCT88 A—Cross-Drilled Hole B—Cross-Drilled Hole CED,TX03399,5953 –19–24MAR00–6/14 12. Install a thrust ring on each end of pin. 13.

Move completed split link assembly to rear seat of saddle. T96278 –UN–27OCT88 Continued on next page CED,TX03399,5953 –19–24MAR00–7/14 TM1859 (14JUL04) 01-0130-40 700H Crawler Dozer 071404 PN=90