DETAILED CONTROLS AND GAUGES OPERATION FUSE NOTICE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace the fuse with another of the same capacity. Fuse Capacities and Circuit Names FUSIBLELINK If the starting motor does not move even when the starting switch is turned to the ON position, there is probably a break in the wire-shaped fusible link (1), so open the engine hood and check or replace.
REMARK A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical components and wiring from burning, in the same way as an ordinary fuse. 3-32 Fuse capacity Name of circuit (1) 10A Automatic greasing, radio (back up) (2) 10A Controller, monitor panel, solenoid valve (3) 15A Wiper, radio, horn, room lamp, win- dow washer (4) 10A Head lamp (5) 15A Heater, swift deceleration (6) 20A Spare fuse (Air conditioner) (7) 10A Spare fuse (8) 15A Spare fuse (9) 20A Spare fuse