TCD 2015 Drive system W 02-09-03 Insert bearing shell in the respective big end bearing cap. Attention! Note the assignment of the bearing shells. The anti-rotation lock (1) must lock in groove (2). 2 1 6 © 36769-1 Arrange the piston ring joints with an offset of about 120° to each other. Check piston rings and piston ring grooves. W 02-10-03 © 42380-1 Lightly oil cylinder running surface, piston, piston rings and lifting bearing journal lightly. Clamp piston rings with piston ring compressor (1). Do not turn the piston rings any further. 1 © 36771-1 © 06/2006 8170-001 5/8