TCD 2015 Crankcase W 03-08-03 Clean sealing surfaces. Mount new gasket. Mount oil cooler cover (4). Mount holder (1). Fasten all screws. 4 3 1 Screw length: M8 x 35 mm (2) M8 x 65 mm (3) 2 2 6 © 40562_1 Mount holder (1). Fasten all screws (2). 1 2 © 40523-0 Align oil cooler cover. The lay-on surfaces of the oil cooler cover and the genset support must contact the holders. Do not move gasket. 1 Tighten all screws (1) alternately. A08 050 © 40524-0 © 06/2006 8179-001 5/10