TCD 2015 General W 00-02-06 Connect adapter (1) to connector. 1 6 © 40641-0 Mount the compression tester on the adapter. Turn over engine with starter. P00 51 © 40642-0 The measured compression pressure depends on the starting speed during the measuring process and the altitude of the engine installation site. Therefore, limit values cannot be determined exactly. The compression pressure measurement is only recommended as a reference measu- rement of all cylinders of an engine to each other. If more than 15% deviation has been determined, the cause should be determi- ned by disassembling the cylinder unit con- cerned. No. Kompression in bar Compression value in bar Pression en bar Dat.
_________ 10 15 20 25 30 35 40 Zyl. 1 2 3 4 5 6 7 8 DBGM Made in Germany M OTO M ETER © 33771-5 © 06/2006 8148-001 2/4