TCD 2015 Engine control W 04-05-05 Insert the injection pump camshaft gear wheel in the camshaft gear wheel. The marking on the gear wheel must be between the markings of the injection pump camshaft gear wheel (1). 6 1 © 40447-0 Attention! Make sure no parts fall into the crankcase! Fasten all screws (1). Concealed screws can be accessed by turning the crankshaft with the turning gear. 1 © 40448-0 Checking the tooth edge clearance of the injection pump camshaft gear wheel Insert dial gauge. Mount magnetic measuring stand. Turn gear wheel in direction of arrow until it stops. Apply stylus under pre-tension to a tooth flank. Adjust dial gauge to "0". © 40449-0 © 06/2006 8187-001 18/24