TCD 2015 Engine control W 04-05-07 Checking the tooth edge clearance of the idler gear (B-bank) Insert dial gauge. Mount magnetic measuring stand. Turn idler gear in direction of arrow until it stops. Apply stylus under pre-tension to a tooth flank. Adjust dial gauge to "0". 6 © 40440-0 Turn idler gear in direction of arrow until it stops. Read off measured value. P04 44 Repeat the measuring process on several tooth flanks. Remove magnetic measuring stand. Remove dial gauge. © 40441-0 Checking the tooth edge clearance of the idler gear (A-bank) Insert dial gauge. Mount magnetic measuring stand. Turn idler gear in direction of arrow until it stops.
Apply stylus under pre-tension to a tooth flank. Adjust dial gauge to "0". © 40442-0 © 06/2006 8189-001 21/32