TCD 2015 Cylinder head W 01-01-01 Set the rotation angle disc with a screwdriver insert at the adjusting screw. Fix magnet of rotation angle disc on cylinder head. Set rotation angle disc to "0". Do not rotate adjusting screw. P01 61 P01 62 6 © 40632_1 Turn the adjusting screw in the direction of the arrow. P01 62 © 40633-0 Tighten lock nut (1) with open wrench. A01 003 Do not rotate adjusting screw. Remove rotation angle disc. Set all other valves according to the valve setting schematic T01 63. 1 © 40638_1 © 06/2006 8150-001 3/4