TCD 2015 Cylinder head W 01-02-02 The pushrod must be seated with the ball head in the ladle of the tappet. Attach turning gear. W 04-06-03 6 © 40490-0 Turn crankshaft until reaching the base circle posi- tion of inlet and exhaust cams of the respective cylin- der. Mount rocker arm bracket. Attention! The longer side (1) must point upwards. 2 The ball heads (2) must be seated in the ladles of the pushrods . 1 © 45805-0 Align rocker arm to the pushrods/valves. Tighten screws (1) alternately. 1 1 © 45806-0 © 06/2006 8151-001 3/6