Deutz TCD 2015 — OBJ BUCH-190-001

TCD 2015 Fuel system W 07-07-02 Assembling fuel injector Check injection nozzle. Attention! Do not touch the nozzle needle with your fingers! Nozzle needle (1) and nozzle body (2) are folded together and may not be switched or changed individually! 1 2 6 © 33904-2 The nozzle needle (1) must slide slowly and without jolting into its seat by the force of its own weight with the nozzle body (2) held vertically. In case of abrupt sliding of the nozzle needle, clean the injection nozzle again in the diesel bath, renew if necessary. 1 2 Also clean the new injection nozzle in the clean diesel bath. © 33904-2 Visually inspect the seat surfaces of the intermediate piece for wear.

Make sure the centering pins (arrows) are in place. © 33905-2 © 06/2006 8220-001 2/6