TCD 2015 Fuel system W 07-07-05 Compare measured values. P07 52 The measured values of three tests must match the test value. In case of deviations from the test value, the fuel in- jector must be dismantled or exchanged. W 07-07-02 6 © 36293-2 Checking tightness Blow the injection nozzle and nozzle holder dry with air. Press the hand lever of the tester down slowly until about 20 bar below the previously read opening pressure are reached. © 36293-2 Injection nozzle is tight if it does not drip within 10 seconds. © 36294-2 © 06/2006 8221-001 3/6