TCD 2015 Cylinder head I 01-04-08 Grind cylinder head sealing surface. Check the cylinder head sealing surface. If the cylinder head sealing surface is not level, recognisable from differences in colour of the machined surface, the sur- face must be reground. The adjustment range of the tool is a maximum 0.2 mm per grind. 6 © 39759-1 Checking the cylinder head sealing sur- face Visually inspect the cylinder head sealing surface. Visually inspect the combustion chamber surface. Measure the roughness of the cylinder head sealing surface with the roughness measuring instrument.
P01 93 If the measured value is out of tolerance, the cylinder head sealing surface must be remachined with different setting data for the surface milling machine. © 39760-1 Measure cylinder head height with depth measuring appliance. P01 08 P01 09 When the wear limit is reached, the cylin- der head must be renewed. © 39761-1 © 06/2006 8153-001 2/4