Deutz TCD 2015 — OBJ BUCH-190-001

TCD 2015 Cylinder head I 01-07-09 Renewing valve seat insert (oversize) Commercial available tools: – Tenon milling machine, 10 mm – Internal measuring device – Slide gauge – Cylinder head machining tool – Press – Industrial vacuum cleaner – Press-in pin – Upright drilling machine W 01-05-01 W 01-07-08 Danger! Danger of injury, do not touch supercooled components or the liquid nitrogen! Wear protective gloves and glasses! Attention! The press-in process must be carried out without interruption as a result of the tem- perature difference between the cylinder head and the valve seat insert. The necessary work steps must be practi- sed before pressing in.

– Nitrogen (liquid) 6 The relevant manufacturer’s specifications must be observed when working with the cylinder head machining tool. The respective valve guide must be availa- ble for replacing a valve seat insert. Check valve stand back. W 01-07-08 Remove valves. W 01-05-01 © 40639-0 © 06/2006 8161-001 1/8