Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS AUTO-GREASING SWITCH force is large, this system can reduce the tire slippage to the minimum. CAUTION The tire slip control switch should normally be ON. 3 - 43 When this button switch (31 actuated as desired, regardle The grease pump is actuated only while the button switch is being pressed. When the switch is released, the grease pump stops immediately. Use this switch grease pump and when carry Turn the starting switch ON and check that the auto greasing itor panel lights up. nnection, broken main piping, no e inside grease pump indicator lamp (A) on the mon Lamp lights up: Normal Lamp does not light up:

Disco greas In the following cases, the la mp will flash at 0.5 second intervals.

(1) Empty cartridge, broken c ircuit The circuit pressure when to the set pressure and ca the pump is actuated does not rise nnot carry out greeasing nd the system cannot function ure (2) Power supply cut The power supply is cut a (3) Defective release of press After completion of greasi down and the plunger do cannot be carried out ng, the circuit pressure does not go es not return, so the next greasing g period until pressure inside the e (4) Even when normal, durin circuit rises to set pressur TIRE SLIP CONTROL ON-OFF SWITCH When this button switch (32) i s pressed, the drive force is reduced by the drive force limit system , but compared with when the drive