Komatsu — CONTROL LEVERS, PEDALS, KNOBS

. OPERATION EXPLANATION OF COMPONENTS position. 3 - 51 BUCKET CONTROL Use this lever (8) to Position (a): TILT ver is pulled further fro m the TILT position, the ill stop in that positio n, and when the bucket s the position set by th e bucket positioner, the HOLD Position (b): HOLD cket is kept in the sa Position (c): DUMP REMARK Other ON-OFF switch at the head o f the lever and the load meter cancel switch on the side. For detail s, see SWITCHES (P AGE 3-27). LIFT ARM CONTROL LEVER operate the lift arm. Use this lever (9) to Position (a):

RAISE If the le the lev arm re will ret ver is pulled further fr om the RAISE position, er will stop at that po sition, and when the lift aches the position set by the kick-out, th e lever urn at the same time t o the HOLD position. Position (b): HOLD The lift arm is kept in the sa Position (c): LOWE Position (d): FLOAT The lift arm moves freely un der external force REMARK Other functions inst alled include the kickd own switch at the head of t he lever and the t ransmission auto shift /manual selector switch on the side. For de tails, see SWITCHES (PAGE 3-27).