. OPERATION OPERATION 8. 9. 10. 11. Check for loose battery terminals. Tighten any loose terminal. 12. WARNING REMARK REMARK Tightening torque: 19.6 to 29.4 Nm (2.0 to 3.0 kgm, 14.5 to 21.7 lbft) any 13. 3 - 76 heck for damage and l oose bolts on the han drail and ste epair any damage and tighten any loose bolt s. heck for damage to ga uges, lamps on the in strument pa nel and loose heck for damage to the panel, gauges and la mps. If any p roblem is found , replace the parts. Clean off a ny dir the surface. Tighten heck for loose air clea heck for the loose bolt s.
If loose, tighten the heck for damage to th e seat belt and mounti n if there are no signs of damage, replace belts in accordance with the following schedule: ars after the date of seat belt manufacture, or eve ry 3 years aft er the start of actual usage, whic hever date comes firs RK ate of seat belt manufa cture attached to the s eat belt is t he start of the 5-year period. It is not the start of the r period of actual usag e. RK ate of manufacture of the seat belt is marke d on the bel ace indicated by the a rrow in the diagram on the right. that there are no loos e bolts on the equipme nt mounting elt to the machine, an d tighten if necessary.
belt is damaged or flu ge or deformation of t ff is starting to form, o he seat belt holders, re r if there is place the s ith a new part. heck for loose bolts on heck for any loose or d any loose bolts are fou nd, please ask your K omatsu dis tributor to carry