Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK ELECTRIC WIRING WARNING NOTICE The optimum inflation pressure differs according to the type of work. For details, see "HANDLING THE TIRES (PAGE 3-124)". 3 - 83 If fuses are fre quently blown or if there is a short circuit in the electrical wiring, locate the cause an d repair o r contact your Komatsu distri butor. Accumulation of flammable material (dead leaves, twigs, grass, etc.) around the battery may cause fi re, so alw ays chec k and remove such m aterial. Keep the top su rface of the battery clean a nd check the breathe r hole in the batte ry cap. If it i s clogge d with dir t or dust, wash the b attery cap to clear the breather hole.

Check for dama ge, wrong fuse capacity , and any sign of di sconnection or short circu it in the electric wiring . Also, check and tight en any loose terminals. Particularly, che ck the wiring of the "bat tery", "starting mot or" and "altern When checking flammable mate Please contact your Komatsu distributo r for investigation a nd correction o f the caus CHECK PARKING BRAKE Check that the p arking brake works pro If there is any a bnormality in the operati on of the parking b rake or the bra ke does n ot provi de the pr oper braking effect, please co ntact your Komatsu dis tributor for adjustm ent. CHECK BRAKE ne forward and check the effect of the brakes.

Drive t he machi ne forward and check th e effect of the brak If there is any pr oblem in t he actuation o f the brakes, pleas e contact your Komatsu distribut or to hav e the brakes adjusted. CHECK INFLATION PRESSURE OF TIRE S Measure the infl ation pressure with a tir e pressure gauge, while the tires are cool, b efore st arting w Check for dama ge or wear to the tires a nd the rims. below. Check for loose wheel hub nuts (bolts). The proper infla tion pressure is shown Size Inflation pressure 55.5/80-57-68PR(L5) (Standard) 0.59 MPa {6.0 kg/cm2, 85.2 PSI} 65/65-57-62PR(L5) (If equipped) 0.49 MPa {5.0 kg/cm2, 71.0 PSI} 60/80R57a(L5) (If equipped) Front wheel:

0.63 MPa {6.4kg/cm2, 90.9 PSI} Rear wheel: 0.50 MPa {5.1kg/cm2, 72.4 PSI}