Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION (J) Lumbar support ADJUST SEAT BELT WARNING (1) to 3 - 87 Turn the knob (6) to the right or left to give the suitabl e amoun t of lumba r supp (K) Adjusting hardn ess of suspension damper Operate knob (7) to adjust the damping force suspens damper. If knob (7) i s moved to face the outside of the seat (a), t damping force beco mes stronger; if the knob is moved to face t inside of the seat (b ), the damping force beco Amount of adjustme Before fitting the se at belt, check that there is no p roblem in the belt mount bracket or m ounting belt. If it is worn or damaged, replace the seat bel t. signs of damage, replace belts in accordance with the following schedule:

te of seat belt manufacture, or every 3 years after the start of actual usage, whichever date comes first. at belt during operations. hat it is not twisted. Even if there are no signs of damage, replace belt s in accordance w ith the following sc 5 years after the da te of seat belt manufacture, or every 3 years afte r the start o f actual usage, whiche ver date comes fi rst. Always wear the se Fit the seat belt so t REMARK The date of seat bel t manufacture attached to t he sea t belt is th e start of t he 5-y ear period. It i s not the start o f the 3-year period of act ual usage. FASTENING AND REM OVING BELT hat it is tight without being too tight.

Fasten the belt so t hat it is tight without being t oo tigh 1. Sit on the seat, seat so that you 2. Sit on the seat securely into bu check that it is fi 3. When removing free the belt. Fit the belt so th 1. Sit on the seat, depress the brake pedal f ully, an d adjust t r back is pressed against t he backrest. insert tongue 2. Sit on the seat , pull the right belt, then insert ckle (2) until a click is heard. Pull the belt rmly locked. rd. Pul 3. When removing the belt, press the red but ton in b uckle (2) at it follows your body and is not twisted. at it follows your body and is not t