. OPERATION OPERATION STOPPING THE MACHINE WARNING Avoid stopping the machine suddenly. As far as possible, always leave NOTICE 3 - 107 a margin w hen stopping. king the machine on a slop e. If it is necessary to park the Avoid par machine o n a slope, stop the machine facing directly down t he slop e, fit blocks und er the tires and lower the b ucket to the ground to prevent the machine fr om moving. k equipment control lever is touched by mistake, there is If the wor danger tha t the work equipment or m achine may move su ddenly and cause a se rious accident.
Before stan ding up from the operator's s eat, always set the lock levers (for the wo rk equipment control levers and joystick st eering lever) securely to th e LOCK position. When the parking brake switch is turn ed ON, it is dangerou s to release the brake pedal immediately. Always keep the brake pedal depressed until the p arking brake pilot lamp ligh ts up. Never use the parking brake switch to br ake the machine whe n traveling except in an emergency. Apply t he parking brake only after the mac 1. Release accelerator pedal (1), th en depress brake p edal (2 ) to stop the machine. 2. Set dire ctional switch (4) at the head of joystick steering le ver (3) to th e N position.