Komatsu — OPERATION OF WORK EQUIPMENT

. OPERATION OPERATION TURNING WARNING 3 - 109 Operatin g the steering whee l suddenly at high spe ed or operating the steering wheel on steep slopes i s dangerous. Do not the steering wheel i n such situations. If the en gine stops when the machine is traveling, th e emergency steering is actuated. Note that this syste m is only for steering encies, so never sto p the engine. icularly dangerous i f the engine stops wh en the machine is t raveling on slopes, so never let t he engine stop when on slopes. gine stops, stop the machine immediately When trav eling, angle joysti ck steering lever (1) in the direction o turning, a nd the machine wi ll turn.

With this machine, the front and rear frames arti culate around the connectin g pin (center pin) connecting the front and rear frames The rear w heels follow the s ame path as the front wheels when the machine t urns. erating the joystick steering lever, angle the joystic When op steering l ever lightly to follo w the turning angle of the machine. NOTICE ng fully, stop operating the steering lever when it reaches the end of its stroke. Do not operate beyond this point. When turni ng fully, stop operat ing the steering lever w hen it reaches the end of its stroke. Do not operate beyond this point. Check also that the actuation of the steering is normal.

If any abnormality is found, please ask your Komats u distributor to carry out inspect ion. OPERATION OF WORK EQUIPMENT Lift arm c ontrol lever (1) and bucket control leve r (2) can be used