Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION 3 - 115 CROSS DRIVE LOADING Always set the wheel lo ader facing at a right angle to the stockpile. After digging in and s cooping up the load, drive the machine straight back in reverse, then bring the dump truck i n between the stock pile and the whee This method requires th e least time for loading, an d is extremely effective in reducing the V-SHAPE LOADING k so that the direction of approach of the Position the dump truc proach of the wheel loader is approx. 60 degrees from the directio n of approach to the stockpile. After l oading the bucket, drive the wheel loader in reverse, then turn it to face the dump truck and tra vel forward to load the dump truck.

angle of the wheel loader is, the more ecomes. The smaller the turning efficient the operation b When loading a full buc first shake the bucket ket and raising it to the ma to stabilize the load befor ximum height, e raising the e rear. bucket. This will preve nt the load from spilling to th e rear.