Komatsu — PRECAUTIONS FOR OPERATION

. OPERATION OPERATION PRECAUTIONS WHEN DRIVING MACHINE Ambient temperature ( ° C) Continuous travel distance Max. 45 Max. 25 km If the ambient temperature, tire conditions, or continuous travel distance are not within the conditions in the above table, please contact your Komatsu distributor or the tire dealer. Check the tire pressure before starting, when the tire is cool. Always travel with the bucket empty. Never put "calcium chloride" or "dry ballast" in the tires when traveling. 3 - 118 When th e machine t ravels at h igh s peed for a long d istance, the tires become extremely hot. This causes early wear of t he tires and should be avoided a s much as possible.

If the machine must be driven f or a long distance, take the following precautions. Follow the regulations relate d to this m achine, an d drive carefully Before driving the machine, carry out th e checks b efore starting. The m ost suitable tire pressure, t ravel speed, or ti re type differ according to the condition of the t ravel surface. Conta ct your K omatsu distributor or tire dealer for information. When travelin g with standar d tire s (L5) on a pave d road surface, use the following table as a guide.

Tire Tire conditions (Standard) 55.5/80-57-68PR (L5) (Standard tire inflation pressure) 0.59 MPa (6.0 kg/cm2, 85.2 PSI) At least 24 hours after completion of work, when tire temperature has gone down (If equipped) 65/65-57-62PR (L5) (Standard tire inflation pressure) 0.49 MPa (5.0 kg/cm2, 71.0 PSI)