Komatsu — RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL

. MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT MAINTENANCE RECOMMENDED FUEL, COOLANT, AND LUBRICANT NOTICE Use only diesel fuel. The engine mounted on this machine employs electronic control and a high-pressure fuel injection device to obtain good fuel consumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication. If kerosene or other fuel with low lubricating ability is used, there will be a big drop in durability. Note 1: Oil used in the power train is different from engine oil. Use an appropriate oil recommended for each application. Note .2:

If the machine is equipped with an auto-greasing device, use lithium-based grease No. 0 when operating at temperatures below -20 ° C (-4 ° F). Note .3: Use GL-5 for the SAE80W-90 gear oil. Do not use GL-4. Note 4: COOLANT 1) Komatsu genuine SUPERCOOLANT (AF-NAC) has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze COOLANT is essential. Komatsu machines are supplied with SUPERCOOLANT (AF-NAC). SUPERCOOLANT (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for two years or 4000 hours.

SUPERCOOLANT (AF-NAC) is strongly recommended wherever available. 2) For details of the ratio when diluting COOLANT with water, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-23)". When the machine is shipped from the factory, it may be filled with coolant containing 30% or more COOLANT (AF-NAC). In this case, no adjustment is needed for temperatures down to -10 ° C (14 ° F). (never dilute with water) 3) To maintain the anticorrosion properties of COOLANT, always keep the density of COOLANT between 30% and RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL When using commercially available oils other than Komatsu genuine oil, consult your Komatsu distributor.

4 - 12 Reservoir Capacity Engine oil pan Transmission case Hydraulic system Brake tank Brake Cooling Specified Liters 300 380 1900 60 280 US gal 79.20 100.32 501.60 15.84 73.92 Refill Liters 260 350 1200 45 270 US gal 68.64 92.40 316.80 11.88 71.28 Reservoir Capacity Axle (front and rear) (each) Auto-grease Work equipment pin Cooling system Fuel tank Specified Liters 670 - - 510 5100 US gal 176.88 - - 134.64 1346.4 Refill Liters 670 - - - - US gal 176.88 - - - -