. MAINTENANCE SERVICE PROCEDURE CLEAN RADIATOR FINS AND OIL COOLER FINS WARNING Carry out this procedure if there is any mud or dirt stuck to the radiator or oil cooler. of the radiator dirt, or leaves clogging radiator fins. CLEAN FUEL COOLER FINS WARNING any 4 - 29 If compressed air, high-pr essure water, or steam hits your bo dy direc tly or dirt is sent flying by the compressed air, high-pressure water, or steam, there is d anger of personal injury. A lways w ear protectiv e glasses, dust mask, an d other protective equipment. 1. Remove bolt (1) a nd open radiator grill (2) . 2. Open inspection c 3. Use compressed Steam or water may b e used instead of compressed air.
H owever, when carrying o ut powerful steam cleaning (high-pressure machin e wash) of the heat exchange equipment ( radiator, oil cooler), maintain sufficient distance from the machine whe n carrying out the operation. If steam c leaning (high-pressure m achine wash) is carried out a t close range, there is danger that the internal fins of t he hea t exchange equipment ma y be deformed, and this will cause early clogging a nd breakage. 4. Check the rubber h ose. Replace with a new one if the hos e is f ound to have cracks or to be hardened by aging. Also, check hose c lamps for looseness . Never use steam clean ing to clean the fuel cooler fins.
T here is d ange r that the fuel may over heat. Letting compressed ai r or pressurized water hit a person 's body directly, or using these and causing dust to fly may cause personal injury. Alway s wear protective glasses, anti-du st mask, and other protective equipm ent. If there is mud or dust on the fuel cooler, clean the fu el coole 1. Remove cover (1) 2. Use compressed mud, dirt, or leave 1. Remove cover (1) from the fuel cooler. 2. Use compressed air or high-pressure water s stuck to the fuel cooler