Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CHECK INFLATION PRESSURE OF TIRES WARNING NOTICE The optimum inflation pressure differs according to the type of work. For details, see "HANDLING THE TIRES (PAGE 3-124)". 4 - 42 When inflating a tire, che ck that no one will enter the working are a. Use a air chuck which has a cl ip and which can be fixed to the air valve . While inflating the tire , check the inflation pressur e occasional ly so th it will not rise too hig h. If the rim is not fitted normally, it may be broken a nd scattered while t tire isinflated. To ens uresafety, placea guard aro und the tirea nd do n work in front of the ri m but work on the tread sid e of the tire.

f the ri Abnormal drop of in flation pressure and abnor mal fitting o indicate trouble in the tire or rim. In this case, be s ure to ask a t ire repa shop to carry out rep airs. e specified inflation pressure. lation pressure of the tires just after high-spee work. Be sure to observe th e specified inflation pressu Do not adjust the inf travel or heavy-duty CHECK Measure the inflation pressure with a tire pres sure gauge , while the tires are cool, before INFLATION OF TIRES essure properly. Adjust the inflation pr When inflating a tire, use an air chuck which c an be fixed to the air valve of the tire as sho wn in the figure.

Do not work in front of the ri m but work on the tread s ide of the ti The proper inflation p ressure is shown below. Size Inflation pressure 55.5/80-57-68PR(L5) (Standard) 0.59 MPa {6.0 kg/cm2, 85.2 PSI} 65/65-57-62PR(L5) (If equipped) 0.49 MPa {5.0 kg/cm2, 71.0 PSI} F 60/80R57a(L5) (If equipped) R ront wheel: 0.63 MPa {6.4kg/cm2, 90.9 PSI} ear wheel: 0.50 MPa {5.1kg/cm2, 72.4 PSI}