Komatsu — EVERY 100 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING The parts and oil are at high temperature immediately after the stopped, and may cause burns. Wait for the temperature to go down before starting the work. 1. Lower the bucket to the ground, stop the engine, wait for approx. 5 minutes, then check that the oil level is near the top of sight gauge (G). NOTICE to spurt out. 2. If the oil level is not near the top of the sight gauge, open the inspection cover at the top of the step and add oil through oil filler (F). When adding oil, it is possible to check the oil level with oil level gauge (1). The oil should be near the H mark on the oil level gauge.

4 - 45 EVERY 100 HOURS SE Maintenance for every 50 ho urs service should be carried out a t the same ngine is When removing the oil filler c ap, turn it slowly to release the internal pressure, If the oil has been added to abov e H level, stop the engine and wait for t hydraulic oil to cool down, then d rain the excess oil from the drain plug. the oil is above H level, it will dam age the hydraulic circuit or cause the