. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING engine is stopped, and may cause burns. Wait for the side cover at the left side of the machine, 4 - 49 The parts and oil are at high temperature i mmediatel temperature to go dow n before starting the w ork. When removing the oil filler cap, turn it slowl y to re leas e the in ternal Refill capacity of oil pan: 260 liters (68.6 4 US gal Prepare a filter wre nch 1. Open the engine then open engine 2. Set the container t o catch the oil immediately under dra in plug (P) on the left side of the machine. 3. Loosen drain plug (P), and drain the oi l. are excessive metal 4.
Check the draine particles or foreig distributor. excessive conta omatsu 5. Install drain plug ( 6. Open the cover at t he front face of the c enter fuel tank, t hen set the container to ca tch the oil immediate ly under drain p lug (1). 7. Loosen drain plug (1) to drain fuel. 8. Inspect the draine d oil, and if there is a large amount o f metal particles or foreig distributor. n material, please contact your Komatsu (1). nch, remove full-flow filter cartridge (2) (4 conta omatsu 9. Tighten drain plug 10. Using the filter wre nch, remove full-flo w filte r cartridge (2) (4 places). 11.
Clean the filter hol der, fill the new filter cartridge with oil , then coat the seal and thread of t he filter cartridge with oil (or coat thinly w ith grease) and inst all. into contact with the filter holder, then tighten a further 3/4 to 1 turns. 12. When installing, br ing the seal surface into c ontact wit h the filter holder, then tighten a fu