Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 75 3. Stop the machine so t hat d rain pl ug (3) o f the final drive is at the b ottom. Remove o il fille r plug (4) and drain plug (3), then inser t the tube of the supplied too l in the hole of plu drain the oil 4. After draining t he oil, c lean drain p lugs (2) and (3), th en install them 5. Add the s pecified f oil th il filler por ts (1) and (4) o f the axle housing and left an d right f inal drives 6. After adding o il, chec k at l evel pl ug (1) that the oil specified level . F or d etails CHECK ADD OIL (PAGE 4-27 REMARK For operations where the brake is use d frequently, cha nge the axle oil at shorter interva