Komatsu — PRECAUTIONS FOR MAINTENANCE

. SAFETY PRECAUTIONS FOR MAINTENANCE harmful objects such as oil, fuel, coolant, solvent, filters, and batteries. 2 - 42 PRECAUTIONS WITH HIGH-PRESSURE OIL The hydraulic system is always under internal pr essure. When inspecting or replacing piping or hoses, always Th e hydraulic syste check that the press ure in the hydraulic circuit ha s been released. If the circuit is still un der pressure, it will lead to serious personal i njury, so always do as follow s. When carrying out inspection and maintenance of the pressure, release the pressure be fore starting. For details, see "STOP ENGI NE BEFORE CARRYING OU T MAINTENANCE (PAGE 2-37)".

Do not carry out ins pection or replacement w ork with the circuit under pres sure. I f there is any leak age from the piping or hoses, t he surrounding are a will be wet, so che ck for cracks in th e piping and hoses and for swelling in the hoses. and leather gloves. ing from small ss if it contacts pressure oil and lace with clean dical attention. When carry out in spection, wear safety glasses and leather gloves There is a hazar d that high-pressure oil leak holes may penetrate your skin or cause blindne your eyes directly.

If you are hit by a jet of high- suffer injury to your skin or eyes, wash the p water, and consult a doctor immediately for me holes may penetr ate your skin or cause blindne your eyes directly. If you are hit by a jet of high- suffer injury to yo ur skin or eyes, wash the p water, and consul t a doctor immediately for me HANDLING HIGH-PRES SURE HOSES I f oil or fuel leaks f rom high-pressure hoses, it m ay cause fire or defective operation, w hich may lead to serious i njury or property damage.

If any loose bolts ar e found, stop work and tighten to the s I f any damaged h oses are found, stop operatio ns immediately and contact your Kom Replace the hose if any of the following problems Damaged or leak ing hydraulic fitting. Frayed or cut cov ering or exposed reinforceme Covering swollen Twisted or crushe Foreign material WASTE MATERIALS To prevent pollution, pay careful attention to the m ethod of disposing of waste materials Always put oil dra ined from your machine in co drain oil directly system, rivers, the Obey appropriate MERCURY CONTAINING COMPONENT(S) The monitor display backlight contains mercury.

The machine may be equipped with optional High Intensity Th e monitor display ntensity Discharge lighting l amps which also may contai n mercury. These components must be reused, recycled or properly disposed of in accordance with applicabl e Local, State and Federal Laws.