. OPERATION EXPLANATION OF COMPONENTS REMARK 3 - 32 TRANSMISSION AUTO SHIFT/MANUA L SELECTOR SWITCH Press this switch (7) to switch the tra nsmission between auto shift and manu al shift. hift mode. Position ( a): This switches to auto s If it is set to this position the auto shift mode is speed range is display indicator lamps at the b , the speed range last used in saved to memory, and that ed on the 1st, 2nd, and 3rd ottom of the main monitor. l shift mode. ion, the transmission speed Position ( b): This switches to manua If it is set to this posit range is set to 2nd.
In e ither p osition (a) or (b), when shi fting gear, use shift up switch (A) ft down switch (B) at the head of the joystick steering KICKDOWN SWITCH When the transmission is in 2nd, if s witch (8) at the head of the lift arm contr ol lever is pressed, the tra nsmission shifts down to 1st. Use this w hen it is desired to increa se the traction during digging operation s. When can celing the kickdown switch , operate the forward-reverse switch to speed ra REVERSE or Neutral, or nge other than 2nd.
It is shift the transmission to a also possible to cancel the kickdown switch by actuating the pa rking brake switch or turning the startin TURN SIGNAL SWITCH Use this s witch (9) to operate the tu Position ( a): Right turn (operate swit Position ( b): Left turn (operate switc REMARK When the switch is operated, the turn signal pilot lamp also p. l ights u The tu rn signal switch does not r eturn automatically when the j oystic k steering lever is returne position. d. Return it by hand to the neutral