WELDING BODY PROTECTOR 40 HD325, 405-6 Process drawing CO gas arc welding 2 Arc welding Remarks Welding position Flat (F) Flat, vertical (V) (1) Do not apply CO gas 2 welding when wind velocity is higher than 2 – 3 (m/sec). (2) Remove moisture, dust, and paint from surfaces to be welded. Welding rod JIS Z3312YGW11 or equivalent d1.2, 1.6 JIS Z3212D5016 or equivalent d4.0, 5.0 Welding current (A) 320 – 350, 380 – 420 130 – 160, 220 – 260 Preheating/Postheating Unnecessary Unnecessary Gas shielding rate (l/min) 25 – 35 —