. SAFETY PRECAUTIONS FOR OPERATION starting circuit. This may cause fire, serious 2 - 23 INSPECTION AND MAINTENANCE BEFORE STARTING ENGINE Carry out the following checks before starting the engine at the begin ning of the day's work to ensure that there is no problem with the operation of the machine. If this inspection is not carried out properly problems may occur with the operation of the machine, and there is danger that this may lead to serious personal injury or death. ood view. Remove all dirt from the surface of the window glass to ensure a g "WALK-AROUND CHECK (PAGE 3-88)" is surely executed.
Remove all dirt from the surface of the lens of the front lamps, wo rking lamps, and rear combination lamp, and check that they light up correctly. Check the coolant level, fuel level, and oil level in engine oil pan, ch eck for clogging of the air cleaner, and check for damage to the electric wiring. Check that there is no mud or dust accumulated around the movabl e parts of the accelerator pedal or brake pedal, and check that the pedals work properly. Adjust the operator's seat to a position where it is easy to carry out o perations, and check that there is no damage or wear to the seat belt or mounting clamps.
Check that the gauges work properly, check the angle of the mirro r, and check that the control levers are all at the Neutral position. lever is in the LOCK position. arly from the operator's seat. See "ADJUST he area around the machine. Before starting up the engine, check that the work equipment lock Adjust the mirrors so that the rear of the machine can be seen cle REAR VIEW MIRROR (PAGE 3-103)". Check that there are no persons or obstacles above, below, or in t PRECAUTIONS WHEN STARTING ENGINE Start and operate the machine only while seated. When starting the engine, sound the horn as a warning.
Do not allow anyone apart from the operator to ride on the machin Do not attempt to start the engine by short-circuiting the engine personal injury or death. Check that the backup alarm (alarm buzzer when machine travels PRECAUTIONS IN COLD AREAS Carry out the warming-up operation thoroughly. If the machine is not thoroughly warmed up before the control levers are operated, the reaction of the machine will be slow, and this may lead to unexpected accidents. If the battery electrolyte is frozen, do not charge the battery or st art the engine with a different power source. tery to explode.
There is a hazard that this will ignite the battery and cause the bat Before charging or starting the engine with a different power sourc e, melt the battery electrolyte and check that there is no leakage of electrolyte before starting.