Perkins — Perkins 1204F-E44TA and 1204F-E44TTA Industrial Engine Systems Operation Manual

Engine Operation 62 UENR4490-01 ECM The ECM has an excellent record of reliability. Any problems in the system are most likely to be the connectors and the wiring harness. The ECM should be the last item in troubleshooting the engine. The programmable software contains all the fuel setting information. The information determines the engine performance. Flash programming is the method of programming or updating the programmable software. Refer to Troubleshooting, “Flash Programming” for the instructions on the flash programming of the programmable software. The ECM is sealed and the ECM needs no routine adjustment or maintenance.

Engine Speed The electronic controls determine the injection timing, the amount of fuel that is delivered to the cylinders and the intake manifold pressure if an electronically controlled wastegate is installed. These decisions are based on the actual conditions and the desired conditions at any given time. The ECM has software that compares the desired engine speed to the actual engine speed. The actual engine speed is determined through the crankshaft speed/timing sensor and the camshaft speed/timing sensor. If the desired engine speed is greater than the actual engine speed, the ECM will instruct the electronic unit injector to inject more fuel in order to increase engine speed.

Illustration 55 g01926054 Typical example The Electronic Control Module (ECM) (1) functions as a governor and a computer for the fuel system. The ECM receives signals from the sensors in order to control the timing and the engine speed. Timing Considerations Once the ECM has determined the amount of fuel that is required, the software must determine the timing of the fuel injection. Fuel injection timing is determined by the ECM after considering input from the following components: The electronic system consists of the ECM, the engine sensors, and inputs from the parent machine. The ECM is the computer. The personality module is the software for the computer.

The personality module contains the operating maps. The operating maps define the following characteristics of the engine: Engine coolant temperature sensor The sensor for the intake manifold air temperature Engine rating The sensor for the intake manifold pressure Torque curves High and low idle speed (rpm) Emissions Injection timing The factory passwords restrict changes to authorized personnel. Factory passwords are required to clear any event code. Refer to Troubleshooting, “Factory Passwords” for more information on the passwords.