Engine Operation 70 UENR4490-01 ECM Power Supply Illustration 64 g03813883 The power supply to the ECM and the system is drawn from the 24 V or the 12 V battery. The power supply for the ECM has the following components: The display screen on the electronic service tool can be used to check the voltage supply. Battery Disconnect switch Ignition keyswitch Fuses Ground bolt ECM connector The Schematic for the ECM shows the main components for a typical power supply circuit. Battery voltage is normally connected to the ECM. The input from the ignition keyswitch turns on the ECM. The wiring harness can be bypassed for troubleshooting purposes.