Komatsu — 24.1.1 CLEAN INSIDE OF COOLING SYSTEM

11. To remove the air in the cooling water, run for five minutes at low idling, then for another five minutes at high idling. (When doing this, leave the radiator cap off.) 12. FULL Drain the cooling water inside sub-tank @, clean the inside LOW - of the sub-tank, then fill again with cooling water to a point midway between the FULL and LOW marks. , &3 117M 13. Stop the engine, wait for 3 minutes, add city water until the water level reaches near the water filler port, then tighten the cap. 3-26