Komatsu — 24.4.5 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE (D60P, 65EX, PX ONLY)

24. SERVICE PROCEDURE 7. When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up 3/4 to 1 of a turn. 8. After replacing the filter cartridge, add engine oil through oil filler 0 until the oil level is between the H and L marks on the dipstick. For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENTTEMPERATURE”. 9. Run the engine at idling for a short time, then stop the en- gine, and check that the oil level is between the H and L marks on the dipstick. For details, see “24.2 CHECK BE- FORE STARTING”.

NOTICE Even if the machine has not been operated for 250 hours, the oil and filter cartridge must be replaced when the ma- chine has been operated for 6 months. In the same way, even if the machine has not been oper- ated for 6 months, the oil and filter cartridge must be re- placed when the machine has been operated for 250 hours. 3-54