24. SERVICE PROCEDURE 24.5.2 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE (D65E ONLY) The oil is at high temperature after the engine has been l,.,l.s. A wARN'NG'l operated so never change the oil immediately after fin- lshmg operations. Wait for the oil to cool down before A CAUTlOlil When draining the oil, do not remove drain plug 8. 0 Container to catch drained oil: Min 38 II capacity Prepare the following. 0 Refill capacity: 38 Q 0 Socket wrench, filter wrench. 1. Remove the cover at the bottom of the machine and set a container to catch the oil under the drain plug. 2. Loosen drain plug @ (with a slit) slowly to avoid getting oil on yourself, and drain the oil. 3.
Check the drained oil, and if there are excessive metal particles or foreign material, please contact your Komatsu distributor. 4. Install drain plug 8. 5. Using a filter wrench, turn filter cartridge 0 counterclock- wise to remove it. When doing this, to prevent getting oil on yourself, do not carry out this operation from immedi- ately under the cartridge. In particular, if this operation is carried out immediately after stopping the engine, a large amount of oil will come out, so wait for 10 minutes before starting the operation. 6.
Clean the filter holder, coat the packing surface of a new filter cartridge with engine oil (or coat it thinly with grease), then install it to the filter holder. Before installing a filter cartridge, be sure to fill the car- tridge with engine oil. 3-62