28. HANDLING DELUXE SEAT A WARNING l Adjust the seat position at the beginning of each shift or when operators change. l Adjust the seat so that the brake pedal can be de- pressed all the way with the operator’s back against the backrest. Fore-aft adjustment of seat Move lever 0 to the right set the seat to a position where it is easy to operate, then release the lever. Fore-aft adjustment: 160 mm (9 stages) Weight adjustment of seat Turn knob 0 under the seat to match the weight adjust- ment scale with your own weight. The weight can be adjusted within a range of 50 - 120 kg.
REMARK If you want to make the seat softer, turn the weight ad- justment to a lower weight; if you want to make the seat har- der, adjust to a higher weight. When operating on uneven surfaces, adjust the seat to a har- der setting. 0 Adjusting reclining angle NOTICE When reclining the seat back to the rear, check the space behind, and adjust to a suitable position. Pull lever 0, set the seatback to a position where it is easy to operate, then release the lever. Adjusting seat tilt Pull up lever 0 to remove the lock, set the seat to the desired position, then release the lever to lock the seat in position. Tilt adjustment: 13 o up and down 5-5