Komatsu — 8.2 DURING MAINTENANCE

AWARNING: Failure to follow these safety precautions may lead to a serious accident. 8. PRECAUTIONS FOR MAINTENANCE -I PRECAUTIONS WITH BATTERY l When repairing the electrical system or when carrying out electrical welding, remove the ne- gative (-) terminal of the battery to stop the flow of current. 4 HANDLING HIGH-PRESSURE HOSES l Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cracked piping, tubes or hoses. They may burst during use. l Always repair any loose or broken fuel hoses or oil hoses. If fuel or oil leaks, it may cause a fire. l Avoid torching, soldering, or welding on pipes, tubes and equipment that contain fuel or oils.

If heated, they can generate flammable fumes or mist and could cause a fire or explosion. -I-- PRECAUTIONS WITH HIGH PRESSURE OIL l Do not forget that the work equipment circuits are always under pressure. l Do not add oil, drain oil, or carry out maintenance or inspection before completely releasing the internal pressure. l If oil is leaking under high pressure from small holes, it is dangerous if the jet of high-press- ure oil hits your skin or enters your eyes. Always wear safety glasses and thick gloves, and use a piece of cardboard or a sheet of wood to check for oil leakage. l If you are hit by a jet of high-pressure oil, consult a doctor immediately for medical atten- tion. 1-21