Komatsu — 11.9 CAP WITH LOCK

11. EXPLANATION OF COMPONENTS 11.8 SASH GLASS INTERMEDIATE LOCK (MACHINES EQUIPPED WITH CAB) Do not stick your head or hand out of the window during Even when the glass is locked, it may move bcause of shock if the machine is started or stopped suddenly. When carrying out operations with the cab sash glass open, use this block to prevent the glass from moving. l When the lever is at the FREE position, the glass can be opened or closed. l When the lever is moved to the LOCK (up or down) posi- tion, the glass is fixed in position. l If the glass is not held securely, set the lever in the FREE position and rotate clockwise to strengthen the holding I power.

l To reduce the holding power, turn counterclockwise. NOTICE Always close the window when traveling or carrying out operations. Leaving the window open will cause the window OPEN LOCK to break. 11.9 CAP WITH LOCK Lock is installed to the fuel tank filler cap. Open and close locking cap as follows: a 1. To open the cap Insert the starting switch key into the key hole on the cap. Insert the key as far as it will go. If the key is turned be- fore it is inserted all the way to the shoulder, it may break. Shoulder 2. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. a 1. 2. To lock the cap. Turn the cap into place.

Turn the key counterclockwise and take the key out. 2-31