Komatsu — 11.15.1 EXPLANATION OF PARTS

11. EXPLANATION OF COMPONENTS 3. MANUAL TUNING BUTTON (TUNE) This is used to select the station or change the frequency. If the station up button A is pressed, the frequency will go up; if the station down button V is pressed, the frequency will go down. AM A part: The frequency goes up by 9 kHz each time the button is pressed. v part: The frequency goes down by 9 kHz each time the but- ton is pressed. FM A’part: The frequency goes up by 0.1 MHz each time the but- ton is pressed. v part: The frequency goes down by 0.1 MHz each time the button is pressed. REMARK If the button is held down, the frequency will change con- tinuously. 4.

PRESET BUTTONS (I, 2, 3, 4, 5, 6) r These buttons can be used to program the desired broad- casting stations. It is then possible to select the station at a touch. 5. TONE ADJUSTMENT KNOB (TONE) Press this knob and it will spring out. Then turn the knob to adjust the tone. Turn this knob clockwise from the center position to em- phasize the high sounds, and counterclockwise to emphasize the low sounds. After completing the adjustment, push the knob back in. 2-38