11. EXPLANATION OF COMPONENTS 11 .15.2 LISTENING THE RADIO (AM/FM) 1. Turn power switch 0 clockwise to turn on the power. Check that display area 0 lights up and that letters are displayed. Press AM/FM selector button 0 to select either AM or FM. Press either automatic tuning button 0 or manual tuning button 0 to set to the desired frequency. If the desired station frequency is set to preset button 8, press preset button 0 to select the station. 2. 3. REMARK To receive a station where the signal is weak, press the manual tuning button to adjust the frequency. 4. Adjust the volume, tone, left/right balance as desired. 5.
To stop the radio, turn power switch 0 completely counterclockwise to turn off the power. When the power is turned off, the display in display area 0 goes out. Method of presetting 1. Press automatic tuning button 0 or manual tuning button 0 to set to the desired frequency. 2. Choose a preset button 0 to use for this station, and keep it pressed for at least 2 seconds to program the button to that frequency. When the sound suddenly disappears and appears again, the button is programmed, and the preset number is shown in display area 0. After programming the button, press the preset button and release it within approx. 2 sec.
The station programmed to that button will be selected for reception. It is possible to program one station for each preset but- ton. 2-40