Komatsu — 12.1.2 CHECK BEFORE STARTING

12. OPERATION 12.1.2 CHECK BEFORE STARTING Always carry out the items in this section before starting the engine each day. CHECK AND REFILL COOLANT Normally, do not open the radiator cap. When checking 1. Open the engine side cover on the right side of the chas- sis, and check that the cooling water is between the FULL and LOW marks on sub-tank 0. If the water level is low, add water to the FULL level through the water filler port in sub-tank 0. REMARK In summer, the coolant may overflow from the sub-tank drain hose. This is no problem. It occurs because too much coolant has been added. FULL - 2. 3. After adding water, tighten the cap securely.

If the sub-tank is empty, check for leakage of water, then add water to the radiator and sub-tank. After adding water, close the engine side cover. 4. CHECKING WITH MACHINE MONITOR (MONITOR PANEL SPECIFICATION) 1. Turn starting switch 0 to the ON position. 2. Check that all monitor lamps light up for 3 seconds, the warning lamp lights up for 2 seconds, and the alarm buz- zer sounds for 1 second. l If the lamps do not light up, there may be a failure or dis- connection in the monitor, so please contact your Komatsu distributor. REMARK P17848 OFF l When carrying out the checks before starting, do not relay only on the monitor. Always carry out all the items listed for periodic maintenance.

ON - START 2-50